Structural Framework
- MS Box Pipe: 3" × 1"
- MS Box Pipe: 2" × 1"
- MS Angle: 1.5" × 1.5"
- High-grade mild steel framework with reinforcement according to display size and installation conditions.
Complete Project Configuration
P2.5 Indoor SMD LED Display Project
Complete technical configuration for an 11.5ft × 6.5ft indoor SMD LED display using Lampro LC2.5P modules and NovaStar control hardware.
- Screen Size
- 11.5ft × 6.5ft
- Display Area
- 74.75 sq.ft.
- Pixel Pitch
- P2.5
- Technology
- Indoor SMD
- Estimated Total Project Price (BDT)
- ৳658,500
1
Complete System Configuration
Project Technical Summary
| Display Type | Indoor SMD LED Display |
|---|---|
| Pixel Pitch | 2.5 mm |
| Module | Lampro LC2.5P, SMD2121, 320 × 160 mm |
| Module Resolution | 128 × 64 pixels |
| Pixel Density | 160,000 pixels/m² |
| Brightness | 450-500 cd/m² |
| Refresh Rate | 3840 Hz standard / 7680 Hz optional |
| Contrast Ratio | 5,000:1 |
| Viewing Angle | 140° Horizontal / 140° Vertical |
| Controller | NovaStar VX400 Pro, up to 2.6 million pixels |
| Receiving Card | NovaStar DH7512 |
| Power Supply | Lampro LD200-V001-4.5, 4.5 V DC / 40 A |
| Structure | High-grade MS box pipe and MS angle framework |
| Data Cabling | CAT-6 |
| Installation | Complete installation, configuration, testing and commissioning |
2
LED Display Module — Lampro LC2.5P
Product Information
| Brand | Lampro |
|---|---|
| Model | LC2.5P |
| Product Type | Indoor LED Display Module |
| Series | LC Series |
| Country of Origin | China |
| Country of Manufacturer | China |
Display & Optical Performance
| Pixel Pitch | 2.5 mm |
|---|---|
| LED Type | SMD2121 |
| Module Resolution | 128 × 64 = 8,192 pixels |
| Pixel Density | 160,000 pixels/m² |
| Brightness | 450-500 cd/m² |
| Single-Dot Brightness Calibration | Supported |
| Viewing Angle | Horizontal 140° / Vertical 140° |
| Contrast Ratio | 5,000:1 |
| Color Temperature | 2,000K-9,300K adjustable |
| Brightness/Color Uniformity | ≥98% |
Electrical & Processing Specifications
| Maximum Input Power | 488 W/m² |
|---|---|
| Typical Input Power | 163 W/m² |
| Power Input | AC 90-132 V / AC 186-264 V |
| Frequency | 47-63 Hz |
| Frame Frequency | 60 Hz |
| Standard Refresh Rate | 3840 Hz |
| Optional Refresh Rate | 7680 Hz |
| Processing Depth | 12-14 bit |
| Video Support | 2K HD / 4K UHD |
| HUB Interface | HUB75 |
Physical & Environmental Specifications
| Module Size | 320 × 160 × 16.6 mm |
|---|---|
| Module Weight | 0.38 ± 0.02 kg |
| Life Span | 100,000 hours |
| Working Temperature | -20°C to +45°C |
| Working Humidity | 10%-50% RH, non-condensing |
| Storage Temperature | -20°C to +50°C |
| Storage Humidity | 10%-60% RH, non-condensing |
| Certifications | BIS / CE / CB / RoHS / EAC |
Key Features
- 320 × 160 mm universal module size.
- High-quality lamp beads with reliable new PCB board design.
- Lightweight module assembly reduces screen weight and structural load.
- Excellent visual performance with good compatibility across the LC indoor series.
- Supports coating process and 45° tangent angle, subject to configuration.
- Supports up to 7680 Hz refresh rate as an optional configuration.
3
All-in-One LED Controller — NovaStar VX400 Pro
Product Information
| Brand | NovaStar |
|---|---|
| Model | VX400 Pro |
| Product Type | All-in-One LED Controller |
| Document Version | V1.3.0 |
| Country of Origin | China |
| Country of Manufacturer | China |
Input & Processing Specifications
| HDMI 2.0 | 1 × HDMI 2.0 IN & LOOP |
|---|---|
| HDMI 1.3 | 2 × HDMI 1.3 |
| Optical Input | 1 × 10G Optical Fiber (OPT 1) |
| SDI Input | 1 × 3G-SDI IN & LOOP |
| USB Input | 1 × USB 3.0 |
| HDMI 2.0 Maximum Resolution | 4096 × 2160 @ 60 Hz |
| HDMI 1.3 Maximum Resolution | 1920 × 1080 @ 60 Hz |
| HDMI Input Support | Up to 240 Hz |
| 3G-SDI Maximum Resolution | 1920 × 1080 @ 60 Hz |
| Input Bit Depth | 8-bit / 10-bit / 12-bit |
| Layer Resources | 6 × 2K × 1K |
| OSD Function | Supported |
| 3D Function | Supported |
| Personalized Scaling | Supported |
| SuperView III Processing | Supported |
Output, Control & Audio Specifications
| LED Outputs | 4 × Gigabit Ethernet |
|---|---|
| Fiber Outputs | 2 × Optical Fiber |
| Monitoring Output | 1 × HDMI 1.3 |
| 3D Connector | 1 × 3D Interface |
| OPT 1 | Operates as video input or sending-card output |
| OPT 2 | Copies or backs up Ethernet outputs 1-4 |
| HDMI Audio | Embedded audio supported |
| Independent Audio | 3.5 mm audio input/output with adjustable volume |
| Control | Front-panel knob, NovaLCT, Unico and VICP App |
| Control Interfaces | Ethernet, USB 2.0, RS232, Genlock and Light Sensor |
Electrical & Physical Specifications
| Power Input | AC 100-240 V, 50/60 Hz |
|---|---|
| Rated Power Consumption | 28 W |
| Dimensions | 483.6 × 301.2 × 50.1 mm |
| Net Weight | Approx. 4 kg |
| Operating Temperature | 0°C to +45°C |
| Operating Humidity | 20%-90% RH, non-condensing |
| Storage Temperature | -20°C to +70°C |
| Storage Humidity | 10%-95% RH, non-condensing |
| Typical Noise Level | 45 dB(A) |
| Certifications | CE / FCC / IC / PSE / RCM / EAC / UL / CB / KC / RoHS |
Key Features
- Combines professional video processing and LED display control in one unit.
- Supports Video Controller, Fiber Converter and ByPass modes.
- Four Gigabit Ethernet outputs with up to 2.6 million pixels loading capacity.
- Maximum output width up to 10,240 pixels and height up to 8,192 pixels.
- Video input up to 4K × 2K @ 60 Hz with up to six-layer video processing.
- Output scaling and pixel-level brightness/chroma calibration.
- Low latency down to 0 frame in ByPass mode.
- Free topology, output synchronization, EDID management and up to 256 user presets.
4
LED Receiving Card — NovaStar DH7512
Product Information
| Brand | NovaStar |
|---|---|
| Model | DH7512 |
| Product Type | LED Receiving Card |
| Country of Origin | China |
| Country of Manufacturer | China |
Performance & Interface Specifications
| Maximum Loading Capacity | 512 × 512 pixels |
|---|---|
| Module Outputs | 12 × HUB75 |
| Parallel RGB Data | Up to 24 groups |
| Temperature Monitoring | Supported |
| Voltage Monitoring | Supported |
| Bit Error Rate Monitoring | Supported |
| Mapping Function | Supported |
| Pre-Stored Image Function | Supported |
| Firmware Readback | Supported |
| Configuration Parameter Readback | Supported |
Electrical Specifications
| Input Voltage | DC 3.3-5.5 V |
|---|---|
| Rated Current | 0.5 A |
| Rated Power Consumption | 2.5 W |
Physical & Environmental Specifications
| Dimensions | 145.7 × 91.5 × 18.4 mm |
|---|---|
| Net Weight | 93.1 g |
| Operating Temperature | -20°C to +70°C |
| Operating Humidity | 10%-90% RH, non-condensing |
| Storage Temperature | -25°C to +125°C |
| Storage Humidity | 0%-95% RH, non-condensing |
| Certifications | RoHS / EMC Class A |
Key Features
- General receiving card for full-color LED display systems.
- 12 HUB75 outputs supporting up to 24 groups of parallel RGB data.
- Color Management and 18Bit+ for improved color and grayscale performance.
- Pixel-level brightness and chroma calibration with quick dark/bright-line adjustment.
- Individual RGB Gamma adjustment, 3D and 90° image rotation.
- Loop backup and dual backup of configuration parameters and application programs.
5
Switching Power Supply — Lampro LD200-V001-4.5
Product Information
| Brand | Lampro |
|---|---|
| Model | LD200-V001-4.5 |
| Product Type | Switching Power Supply |
| Country of Origin | China |
| Country of Manufacturer | China |
Electrical Specifications
| Input Voltage | 200-240 V AC |
|---|---|
| Input Current | 2.5 A |
| Frequency | 50/60 Hz |
| Output Voltage | 4.5 V DC |
| Output Current | 40 A |
Construction & Performance
- Compact metal housing suitable for LED display installations.
- Stable and reliable DC output for continuous LED display operation.
- Wide AC input range with 50/60 Hz compatibility.
- Reliable switching power operation for LED display systems and associated electronics.
- Metal-cased construction suitable for compact installation, control panels and industrial devices.
6
Structure & Accessories
Surface & Cladding
- PVC sheet for rear panel and internal cladding.
- Aluminum Composite Panel (ACP) for protective and decorative finishing where required.
- Suitable finishing materials for neat installation and equipment protection.
Cabling & Electrical
- FRC cable for internal power distribution.
- Electrical cable for internal board-to-board power connection.
- CAT-6 data cable for display data and control signals.
- Required connectors, internal wiring and cable-management accessories.
Fasteners & Accessories
- Screws of various sizes, nuts, bolts and washers.
- Mounting brackets, structural joints and fabrication hardware.
- Module mounting, power and data connection accessories.
- Other required installation hardware.
7
Installation, Configuration, Testing & Commissioning
- Complete installation, assembling and proper alignment of P2.5 indoor LED display modules.
- Fabrication and installation of supporting MS steel structure.
- Installation of PVC/ACP cladding where applicable.
- Installation of switching power supplies and NovaStar DH7512 receiving cards.
- Installation and configuration of the NovaStar VX400 Pro All-in-One Controller.
- Complete AC/DC wiring, internal power distribution and CAT-6 data cabling.
- Controller-to-receiving-card data connection and receiving-card configuration.
- Screen mapping, module configuration and display resolution setup.
- Brightness, color, chroma, refresh-rate and grayscale configuration.
- Input-source, image-scaling, display-area and synchronization configuration.
- Signal, power and content-playback testing.
- Troubleshooting, final optimization, testing and commissioning.
Discuss This P2.5 Indoor LED Display Project
Request a final site-specific configuration and quotation based on viewing distance, installation location, structure and electrical requirements.